HG HWS NU WIP5

The Nu main body detailing almost finish, after that will proceed to HWS weapon system detailing and hopefully i able to finish it before 31st of Aug. So here are the some of the wip picture so far.....
Nu的主机体的细节加强都差不多要完了，接下来的就是HWS装备的细节加强。希望会在8月31号之前搞定它。以下就是最近的过程图。。。。

As usual, SB mini piston and add in to the waist...before that i have to do some cut-out in order to fit in the piston....
像平时的，自制迷你油压管植入腰部。在植入迷你油压管之前得切除一些部分。。。。


The nu head....decided to reshape the original nu head after refer to VP evolve nu
Nu头。。。参考了VP evolve Nu的头后决定从新整形原装的nu头


Simple detailing on funnel use pla-plate....
用胶板在浮游炮做些简单的细节。。。

HWS back skirt, never mod too much, just pla-plate here and there， use pla-rod as well....
HWS后裙甲，没什么大改，只是这里那里加些胶板和胶管。。。

stay tune for next updates....

待续待续.....

HG HWS NU WIP4

It had been quite some times never update my blog. Actually the work still under progress since wip3. I just took the wip picture and now only have times to update my gunpla blog, so here the start of the latest wip....
迟迟都没更新我的部落格，但是进度还是如火如荼进行着。我已经拍了一堆的照片，现在才有点时间整理和更新下我的部落格。。。最新进度开始。。。

Reshape the knee armor use pen-knife, SB some mini vents and replace the original vent location...
用笔刀整型一下膝盖的装甲，自制一些迷你散气口植入代替原来散气口的位置。。。

Separate the parts and shorten it(purpose is to increase feet articulaton), use pen-knife to cut rectangle shape on the left and right, will insert koto part on that hole later....
把这零件分了然后缩短（目的是提高脚的可动性），用笔刀在左右两侧削出正方形的坑,过后将会植入koto零件。。。

Lenghten the feet with pla-plates, follow by koto detailing...
用胶板加长脚趾头，过后用koto零件作为细节。。。

SB 2x2 mini piston and added to the joint of shoulder and body....follow by some pla-plate and koto detailing....
自制2x2迷你油压管植入肩膀和身体之间关节，然后用胶板和koto作为细节。。。