Thursday, July 15, 2010

HG HWS NU WIP4

It had been quite some times never update my blog. Actually the work still under progress since wip3. I just took the wip picture and now only have times to update my gunpla blog, so here the start of the latest wip....
迟迟都没更新我的部落格,但是进度还是如火如荼进行着。我已经拍了一堆的照片,现在才有点时间整理和更新下我的部落格。。。最新进度开始。。。


Reshape the knee armor use pen-knife, SB some mini vents and replace the original vent location...
用笔刀整型一下膝盖的装甲,自制一些迷你散气口植入代替原来散气口的位置。。。


Separate the parts and shorten it(purpose is to increase feet articulaton), use pen-knife to cut rectangle shape on the left and right, will insert koto part on that hole later....
把这零件分了然后缩短(目的是提高脚的可动性),用笔刀在左右两侧削出正方形的坑,过后将会植入koto零件。。。


Lenghten the feet with pla-plates, follow by koto detailing...
用胶板加长脚趾头,过后用koto零件作为细节。。。


SB 2x2 mini piston and added to the joint of shoulder and body....follow by some pla-plate and koto detailing....
自制2x2迷你油压管植入肩膀和身体之间关节,然后用胶板和koto作为细节。。。

4 comments:

  1. 你很厲害咧。。。那個零件那樣小。。你都能弄出來。。。 >///<

    ReplyDelete
  2. 你过奖啦^^ 。。。最近我走的路线都做些小小的东西,细节加强之类的东东XD

    ReplyDelete
  3. 很喜欢你在手那边加油压管~
    你运用 pla plate 到很熟练!

    ReplyDelete